Супер, значи да обобщя:

Orange Pi zero ми е основният OSCAM и правивръзка по CCCAM през рийдър виртуален до друг реален оскам в интернет.

Аз имам пуснато DVBAPI което си работи в лана ми.

За да постигна прешерване на тази линия която получавам по CCCAM, и пак да я дам на някой приемник у дома по cccam, трябва да изпълня следните неща:

Да пусна Newcamd сървър на Orange Pi Zero и да създам юзър в Оrange Pi zero за този Newcamd.

В Raspberry Pi3 тряба да създам Reader който се връзва към Orange Pi Zero по Newcamd.

В Raspberry Pi3 трябва да създам юзър за cccam и да пусна cccam сървър.

И накрая в приемника да вкарам cccam адрес и юзър на Raspberry Pi3 ?



A иначе съм се оскамил яко, на всеки линукс у дома имам пуснат оскам под дефолт :) и на Raspberry Pi3 имам оскам.
И на Мecool k1 pro имам и на Orange Pi zero.
Но най стейбъл е Orange Pi zero че Raspberry Pi3 забива и спира всичко, измислил съм го с урпавляем wifi контакт с интернет достъп през Cloud.

Ако забие го рестартирам през телефона.

Въведи си параметрите направо в основния оскам! Аз съм ти дал пример как да си пуснеш cccam-a, a колегите- newcamd! Ти си избери кой вариант да пробваш!
Ако линията ти има различни caid, по-лесно ще ти е с cccam.

Пробвах твоят подход и резултата е този:

found 2 ECMpids and 2 STREAMpids in caPMT
2019/12/28 13:03:25 28A68FE9 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/12/28 13:03:26 28A68FE9 c (dvbapi) Demuxer 0 found 2 ECMpids and 2 STREAMpids in PMT
2019/12/28 13:03:30 28A68FE9 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2019/12/28 13:03:30 28A68FE9 c (dvbapi) Demuxer 0 stop descrambling program number 0DC0 (Diema Sport 2)

Явно не става.

След рестарт на приемника всичко тръгна става.


Благодаря на всички ^^

5548
 

И аз имам същия проблем.
За сървър имам атемио немесис със Gospell CA Модул и карта - caid 5448. Oscam версията е r11569-798.
За клиент ползвам оптимус 3в1. Със сссам се свързвам.


Направил съм следните настройки:
oscam.conf
[global]
# Prozess
nice = -10
pidfile = /tmp/oscam.pid
# Logging
logfile = /tmp/oscam.log
disablelog = 0
maxlogsize = 256
usrfile = /tmp/oscam_user.log
disableuserfile = 0
usrfileflag = 1
# Timeouts - If you have problems adjust or remove rows!
clienttimeout = 2000
fallbacktimeout = 1000
serialreadertimeout = 800
# Sonstiges
clientdyndns = 0
unlockparental = 1
saveinithistory = 1

[monitor]
port = 15990
#nocrypt = 127.0.0.1,192.168.0.0-192.168.0.255 # "No entry for other IP's!"
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[cccam]
port = 15991
version = 2.1.4
reshare = 1
ignorereshare = 1

[dvbapi]
enabled = 1
au = 1
request_mode = 1

[webif]
httpport = 8888
httprefresh = 0
httpuser = username
httppwd = password
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255
httphideidleclients = 0
httpreadonly = 0

oscam.user
[account]
user = client
pwd = password
umaxidle = 0
keepalive = 1
emmreassembly = 0
group = 2
cccreshare = 1
cccignorereshare = 1
cccstealth = 1

oscam.server
[reader]
label = InternalReader
description = Internal
protocol = internal
device = /dev/sci0
fallback = 1
caid = 5448
detect = cd
cardmhz = 2700
group = 2
cccreshare = 1
ccchop = 1
disableserverfilter = 1
connectoninit = 1

Свързването работи, но клиента не получава ключове. Вместо това виждам следната грешка

2020/02/13 18:54:43 00000000 s (main) System name = Linux
2020/02/13 18:54:43 00000000 s (main) Host name = atemionemesis
2020/02/13 18:54:43 00000000 s (main) Release = 3.14.2
2020/02/13 18:54:43 00000000 s (main) Version = #1 SMP Mon Oct 7 15:50:30 UTC 2019
2020/02/13 18:54:43 00000000 s (main) Machine = mips
2020/02/13 18:54:43 00000000 s (main) Stb model = dm8000
2020/02/13 18:54:43 00000000 s (main) Stb vumodel = vuduo2
2020/02/13 18:54:43 00000000 s (main) Stb boxname = Atemio Nemesis
2020/02/13 18:54:43 00000000 s (main) Stb boxtype = ini-8000am
2020/02/13 18:54:43 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 19348
2020/02/13 18:54:43 00000000 s (emu) OSCam-Emu version 798
2020/02/13 18:54:43 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/02/13 18:54:43 00000000 s (main) signal handling initialized
2020/02/13 18:54:43 00000000 s (net) monitor: initialized (fd=8, port=15990)
2020/02/13 18:54:43 00000000 s (net) cccam: initialized (fd=9, port=15991)
2020/02/13 18:54:43 00000000 s (reader) InternalReader [internal] creating thread for device /dev/sci0
2020/02/13 18:54:43 00000000 s (main) waiting for local card init
2020/02/13 18:54:43 0A46EE4B r (reader) InternalReader [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2020/02/13 18:54:43 0A46EE4B r (reader) InternalReader [internal] Reader sci internal, detected box type: ini-8000am
2020/02/13 18:54:43 5B34B157 h (webif) webif: decompressed 164978 bytes back into 402080 bytes
2020/02/13 18:54:43 5B34B157 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/02/13 18:54:45 00000000 s (main) init for all local cards done
2020/02/13 18:54:45 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/02/13 18:54:45 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/02/13 18:54:45 28BC4021 c (client) plain dvbapi-client granted (anonymous, au=off)
2020/02/13 18:54:45 28BC4021 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2020/02/13 18:54:45 28BC4021 c (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2020/02/13 18:54:49 28BC4021 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 5448 ECM_PID: 0480 PROVID: 000000
2020/02/13 18:54:49 28BC4021 c (dvbapi) Demuxer 0 found 1 ECM pids and 2 STREAM pids in CA PMT
2020/02/13 18:54:49 28BC4021 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2020/02/13 18:54:52 34514D9A c (client) encrypted cccam-client 192.168.1.56 granted (client , au=off)
2020/02/13 18:54:53 34514D9A c (ecm) client (5448@000000/0000/00F5/5A:4366DF4896CE841C705549DD87F45B64): rejected group (0 ms) (no matching reader)
2020/02/13 18:54:54 28BC4021 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2020/02/13 18:55:01 34514D9A c (-) -- Skipped 1 duplicated log lines --
2020/02/13 18:55:01 34514D9A c (ecm) client (5448@000000/0000/00F5/5A:9A8C5E3ACB33AAF6B0EFD722A0395E86): rejected group (0 ms) (no matching reader)
2020/02/13 18:55:05 28BC4021 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Мисля, че оскама на атемиото не чете картата както трябва. Виждам на първа страница
No entitlement

И този лог при стартиране:
waiting for local card init
2020/02/13 20:07:17 01D12865 r (reader) InternalReader [internal] Reader initialized (device=/dev/dvb/adapter0/ca0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2020/02/13 20:07:17 01D12865 r (reader) InternalReader [internal] Reader sci internal, detected box type: ini-8000am
2020/02/13 20:07:17 50DE1F63 h (webif) webif: decompressed 164978 bytes back into 402080 bytes
2020/02/13 20:07:17 50DE1F63 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/02/13 20:07:18 01D12865 r (reader) InternalReader [internal] Error getting card status.
2020/02/13 20:07:18 00000000 s (main) init for all local cards done
2020/02/13 20:07:18 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/02/13 20:07:18 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/02/13 20:07:18 7173799B c (client) plain dvbapi-client granted (anonymous, au=off)
2020/02/13 20:07:18 7173799B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2020/02/13 20:07:18 7173799B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
2020/02/13 20:07:18 7173799B c (dvbapi) ERROR: Can't open device /dev/dvb/adapter0/ca0 (errno=16 Device or resource busy)
2020/02/13 20:07:19 01D12865 r (reader) InternalReader [internal] Error getting card status

Е как ще я чете, като е набримчена на 27 мегахерца?

Сменям от WebIf cardmhz от 2700 на 450. Махнах отметката от това:
Set CardMHz/MHz according to atr for smargo and dreambox int. readers. Default: checked
Но въпреки това като пусна и спра рийдъра оскама сам връща на 2700