Проблем с Phoenix reader

[аспух]

Имам проблем с Phoenix Card Reader. Когато пусна oscam-a в лога излиза това:


2024/09/28 18:06:59 365E4BBD r (reader) neоsat [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2024/09/28 18:06:59 365E4BBD r (reader) neоsat [mouse] Error getting card status.


Настройките в oscam.server са следните:


[reader]
label = neosat
protocol = mouse
device = /dev/ttyUSB0
caid = 4AEE
detect = cd
mhz = 357
cardmhz = 357
ident = 4AEE:000001
group = 1
emmcache = 1,1,2,0
lb_weight = 350
auprovid = 004AEE


За съжаление 2-та светодиода не светят


Излиза това при преглед с libusb:


Bus 001 Device 009: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC


Моля за съвет

[dzumba]

А къде го включваш?Приемник или нещо друго?

[аспух]

В USB-порта на компютър, който върти Ubuntu. С командата pcsc_scan само върти за сканиране, но нищо. Освен да пробвам с драйвер за Windows на 7-ца дали изобщо работи

[dzumba]

Като го мушкаш,трябва да присветва,провери с една лупа конектора отзад на платката!От кой модел е?Друг кабел?

[аспух]

2024/09/28 21:12:53 00000000 s (webif) http disabled
2024/09/28 21:12:53 00000000 s (reader) neosat [mouse] creating thread for device /dev/ttyUSB0
2024/09/28 21:12:53 00000000 s (main) waiting for local card init
2024/09/28 21:12:53 7DE25014 r (reader) neosat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2024/09/28 21:12:54 7DE25014 r (reader) neosat [mouse] card detected
2024/09/28 21:12:55 7DE25014 r (reader) neosat [mouse] Setting baudrate to 9600 bps
2024/09/28 21:12:56 7DE25014 r (reader) neosat [mouse] Bulcrypt card detected, checking card version.
2024/09/28 21:12:57 7DE25014 r (reader) neosat [mouse] Warning: needed try nr 2, next ECM has some delay
2024/09/28 21:12:58 7DE25014 r (reader) neosat [mouse] card system not supported
2024/09/28 21:12:58 7DE25014 r (reader) neosat [mouse] Normal mode failed, reverting to Deprecated Mode

2024/09/28 21:13:00 7DE25014 r (reader) neosat [mouse] Bulcrypt card detected, checking card version.
2024/09/28 21:13:01 7DE25014 r (reader) neosat [mouse] Warning: needed try nr 2, next ECM has some delay
2024/09/28 21:13:03 7DE25014 r (reader) neosat [mouse] card system not supported
2024/09/28 21:13:03 7DE25014 r (reader) neosat [mouse] Try reset reader before each command

2024/09/28 21:13:04 7DE25014 r (reader) neosat [mouse] Setting baudrate to 9600 bps
2024/09/28 21:13:05 7DE25014 r (reader) neosat [mouse] Bulcrypt card detected, checking card version.
2024/09/28 21:13:06 7DE25014 r (reader) neosat [mouse] Warning: needed try nr 2, next ECM has some delay
2024/09/28 21:13:07 7DE25014 r (reader) neosat [mouse] card system not supported
2024/09/28 21:13:07 7DE25014 r (reader) neosat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2024/09/28 21:13:07 7DE25014 r (reader) neosat [mouse] card initializing error
2024/09/28 21:13:08 00000000 s (main) init for all local cards done
2024/09/28 21:13:08 00000000 s (gbox) local gbox failed init
2024/09/28 21:13:08 1E840303 c (client) plain dvbapi-client granted (neosat, au=auto (1 reader))
2024/09/28 21:13:08 1E840303 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2024/09/28 21:13:08 1E840303 c (dvbapi) ERROR: Could not detect DVBAPI version.


В момента няма клиент като приемник. DVBAPI-файлът като цяло липсва. Няма и тунер на компютъра, предполагам кмуникацията и уп-а ще е през camd-протокол?

[dzumba]

Няма ATR
2024/09/28 21:13:03 7DE25014 r (reader) neosat [mouse] card system not supported

Дай снимка на феникса.

[аспух]

Джъмперите са готови, откри я


Това обаче как да го оправим:



2024/09/28 22:33:06 00000000 s (main) init for all local cards done
2024/09/28 22:33:06 00000000 s (gbox) local gbox failed init
2024/09/28 22:33:06 0ABEE6BB c (client) plain dvbapi-client granted (neosat, au=auto (1 reader))
2024/09/28 22:33:06 0ABEE6BB c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2024/09/28 22:33:06 0ABEE6BB c (dvbapi) ERROR: Could not detect DVBAPI version.

[dzumba]

Това си остава така,не се оправя,щото не ти трябва!Закачи един приемник с линия към този оскам и трябва да работи!

[аспух]

Къде греша в настройките:


Страна сървър:
oscam.conf:


[global]
nice = -1
waitForCards = 1
clientTimeout = 5
cacheDelay = 120
logfile = /usr/local/etc/oscam.log
#disablelog = 1

[newcamd]
key = 0102030405060708091011121314
port = 24000@4AEE:000001

[cccam]
[reader]
label = Line1
enable = 1
protocol = cccam
device = 192.168.0.5,25000
account = neosat
password = app1
services =
inac****tytimeout = 1
reconnecttimeout = 30
disableserverfilter = 1
caid =
ident =
group = 1
lb_weight = 100
cccversion = 2.0.3
cccmaxhops = 3
ccckeepalive = 1


#[cs357x]
#port = 25000



Страна приемник:


cccam.cfg:
C: 192.168.0.3 25000 neosat app1


Сървърът е с ip-адрес 192.168.0.3