Bulcrypt v1 и OSCam - Страница 6 - Digital TV Forums

dzumba · #51 17-05-2023

Цитирай:

Първоначално написано от oldgraf

Дзумбата не знам защо го плюе убунтуто като сървър за оскам и феникси...Толкова народ е с такава комбинация.

Перфектно е,но до 12.4! Като оверклокнеш в по горните версии,на 10 рестарта ,три пъти не прочита картата,а при 12.4 е винаги!И закъснение от 50-70 мс!

BULLET · #52 17-05-2023

Цитирай:

Първоначално написано от oldgraf

Пробвай го с колкото може по-къс кабел. Мести го на USB2 и USB3. Ако имаш USB хъб пробвай през него. И извинявай за въпросът, но тези 600мс ги гледаш от уеба на сървъра, а не от някой приемник, нали

са в уеба ги гледам

dzumba · #53 17-05-2023

Уеби ги,щом баца!

BULLET · #54 17-05-2023

Цитирай:

Първоначално написано от dzumba

Уеби ги,щом баца!

Не разбрах ако я пусна на 12 картата ще издържи ли или може да се спече?

bate_dino · #55 17-05-2023

Цитирай:

Първоначално написано от oldgraf

Пробвай го с колкото може по-къс кабел. Мести го на USB2 и USB3. Ако имаш USB хъб пробвай през него. И извинявай за въпросът, но тези 600мс ги гледаш от уеба на сървъра, а не от някой приемник, нали

Така като гледам е закачен на USB 1.1, но има един USB2 порт, ако може на него да се пробва /стига да не е на вътрешна периферия/. Чипа му е FDTI, така че не би трябвало това да е грижа.

Пробвай да сетнеш setserial /dev/ttyUSB0 low_latency какъв ще е ефекта. /ако го няма си дръпни setserial
Ако е ОК, го добавяш в udev rules Нещо от сорта
ACTION=="add", SUBSYSTEM=="usb-serial", DRIVER=="ftdi_sio", ATTR{latency_timer}="1"
или чрез rc.local да вдигне флага "echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer"

BULLET · #56 17-05-2023

Цитирай:

Първоначално написано от bate_dino

Така като гледам е закачен на USB 1.1, но има един USB2 порт, ако може на него да се пробва /стига да не е на вътрешна периферия/. Чипа му е FDTI, така че не би трябвало това да е грижа.

Пробвай да сетнеш setserial /dev/ttyUSB0 low_latency какъв ще е ефекта. /ако го няма си дръпни setserial
Ако е ОК, го добавяш в udev rules Нещо от сорта
ACTION=="add", SUBSYSTEM=="usb-serial", DRIVER=="ftdi_sio", ATTR{latency_timer}="1"
или чрез rc.local да вдигне флага "echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer"

2023/05/17 14

08 0000000 r (reader) bulshitcom [mouse] ATR: 0000000
2023/05/17 14

08 0000000 r (reader) bulshitcom [mouse] Setting baudrate to 9600 bps
това е лога иначе по горното не се получава не се сетва

woooow · #57 17-05-2023

Не мога да разбера, каква е тая мания да си пържите чиповете??? Туй "нящу" работи без да сеца и на 1200мс.

dzumba · #58 17-05-2023

Та до 3000 чак!

BULLET · #59 18-05-2023

проблема се оказа във конфига, дадена е била преференция на кеша пред локалната карта, като обърнах обратно да е преференцията на картата и с настройка 357 на 1000 заработи на 70-80 мс

whitesnake1979 · #60 01-06-2023

2023/06/01 09:38:48 00000000 s (main) System name = Linux
2023/06/01 09:38:48 00000000 s (main) Host name = cuberevo
2023/06/01 09:38:48 00000000 s (main) Release = 2.6.23.17_stm23_A21-slobbie
2023/06/01 09:38:48 00000000 s (main) Version = #1 PREEMPT Fri Sep 24 18:05:41 KST 2010
2023/06/01 09:38:48 00000000 s (main) Machine = sh4
2023/06/01 09:38:48 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 13921
2023/06/01 09:38:48 00000000 s (emu) OSCam-Emu version 791
2023/06/01 09:38:48 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
2023/06/01 09:38:48 00000000 s (main) signal handling initialized
2023/06/01 09:38:48 00000000 s (net) newcamd: initialized (fd=28, port=11500)
2023/06/01 09:38:48 00000000 s (net) -> CAID: 093B PROVID: 000000
2023/06/01 09:38:48 00000000 s (net) newcamd: initialized (fd=33, port=11501)
2023/06/01 09:38:48 00000000 s (net) -> CAID: 183D PROVID: 000000
2023/06/01 09:38:48 00000000 s (net) cccam: initialized (fd=35, port=12500)
2023/06/01 09:38:48 00000000 s (reader) reader_down [internal] creating thread for device /dev/sci0
2023/06/01 09:38:48 79ECB96D r (reader) reader_down [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2023/06/01 09:38:48 79ECB96D r (reader) reader_down [internal] Reader sci internal, detected box type: generic
2023/06/01 09:38:48 00000000 s (reader) emulator [emu] creating thread for device emulator
2023/06/01 09:38:48 1402FA39 r (emu) Stream key delayer initialized
2023/06/01 09:38:48 00000000 (emu) INFO: FFDecsa parallel mode = 32
2023/06/01 09:38:48 00000000 s (main) waiting for local card init
2023/06/01 09:38:48 1402FA39 r (emu) Stream relay server initialized
2023/06/01 09:38:48 1402FA39 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/06/01 09:38:48 7A54396E h (webif) webif: decompressed 180628 bytes back into 446048 bytes
2023/06/01 09:38:48 7A54396E h (webif) HTTP Server running. ip=0.0.0.0 port=8189
2023/06/01 09:38:49 79ECB96D r (reader) reader_down [internal] card detected
2023/06/01 09:38:49 1402FA39 r (reader) emulator [emu] card detected
2023/06/01 09:38:50 1402FA39 r (reader) emulator [emu] found card system emu
2023/06/01 09:38:50 1402FA39 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2023/06/01 09:38:50 1402FA39 r (emu) Key file not found in: /var/etc/oscam
2023/06/01 09:38:50 1402FA39 r (emu) Key file not found in: /var/keys
2023/06/01 09:38:50 1402FA39 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0 A:0
2023/06/01 09:38:51 79ECB96D r (reader) reader_down [internal] ATR: 3B 20 00
2023/06/01 09:38:52 79ECB96D r (reader) reader_down [internal] Bulcrypt card detected, checking card version.
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [internal] Bulcrypt v2 card detected. *UNSUPPORTED CARD VERSION*
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [internal] CAID: 0x4AEE|0x5581, CardType: 0x4c, Serial: #############, HexSerial: ###########
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [internal] Ready for requests.
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [internal] found card system bulcrypt
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Reading subscription info.
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Subscription data last update : 2023-05-31 04:04:01 GMT
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Subscription should be active to : 2023-07-01 04:04:01 GMT
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Subscription data 1 (0x0086): +----++-
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Subscription data 2 (0x0086): +----++-
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Package 02 is active:
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Package 04 is active:
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] Package 80 is active:
2023/06/01 09:38:53 79ECB96D r (reader) reader_down [bulcrypt] End subscription info.
2023/06/01 09:38:53 00000000 s (main) init for all local cards done
2023/06/01 09:38:53 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/06/01 09:38:53 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/06/01 09:38:53 4DCF2D3F c (client) plain dvbapi-client granted (dummy, au=auto (3 reader))
2023/06/01 09:38:53 4DCF2D3F c (dvbapi) Detected /dev/stapi/stpti4_ioctl Api: 2, userconfig boxtype: 6 maximum amount of possible filters is 32 (oscam limit is 32)
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4AEE ECM_PID: 0CE6 PROVID: 000001
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4AEE ECM_PID: 0C1E PROVID: 000003
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0B00 ECM_PID: 0DAE PROVID: 000000
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 0 found 3 ECMpids and 5 STREAMpids in caPMT
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 1 ecmpid 0 CAID: 4AEE ECM_PID: 0CE6 PROVID: 000001
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 1 ecmpid 1 CAID: 4AEE ECM_PID: 0C1E PROVID: 000003
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 1 ecmpid 2 CAID: 0B00 ECM_PID: 0DAE PROVID: 000000
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 1 found 3 ECMpids and 5 STREAMpids in caPMT
2023/06/01 09:38:54 4DCF2D3F c (dvbapi) Demuxer 1 no suitable readers found that can be used for decoding!
2023/06/01 09:38:58 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:38:58 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:03 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:03 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:06 7A54396E h (webif) Refresh Readers requested by WebIF from 192.168.1.5
2023/06/01 09:39:07 79ECB96D r (reader) reader_down [bulcrypt] Deactivating card
2023/06/01 09:39:08 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:08 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:10 1402FA39 r (emu) Reader is shutting down
2023/06/01 09:39:10 7A54396E h (config) readerdb 3 readers freed
2023/06/01 09:39:10 7A54396E h (reader) reader_down [internal] creating thread for device /dev/sci0
2023/06/01 09:39:10 578403AB r (reader) reader_down [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2023/06/01 09:39:10 578403AB r (reader) reader_down [internal] Reader sci internal, detected box type: generic
2023/06/01 09:39:10 7A54396E h (reader) emulator [emu] creating thread for device emulator
2023/06/01 09:39:10 6DC49AC3 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/06/01 09:39:10 7A54396E h (webif) Refresh Readers requested by WebIF from 192.168.1.5
2023/06/01 09:39:10 6DC49AC3 r (reader) emulator [emu] card detected
2023/06/01 09:39:11 578403AB r (reader) reader_down [internal] Deactivating card
2023/06/01 09:39:11 6DC49AC3 r (reader) emulator [emu] found card system emu
2023/06/01 09:39:11 6DC49AC3 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2023/06/01 09:39:11 6DC49AC3 r (emu) Key file not found in: /var/etc/oscam
2023/06/01 09:39:11 6DC49AC3 r (emu) Key file not found in: /var/keys
2023/06/01 09:39:11 6DC49AC3 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0 A:0
2023/06/01 09:39:13 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:13 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:14 4DCF2D3F c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2023/06/01 09:39:14 6DC49AC3 r (-) -- Skipped 1 duplicated log lines --
2023/06/01 09:39:14 6DC49AC3 r (emu) Reader is shutting down
2023/06/01 09:39:15 7A54396E h (config) readerdb 3 readers freed
2023/06/01 09:39:15 7A54396E h (reader) reader_down [internal] creating thread for device /dev/sci0
2023/06/01 09:39:15 150ACD8A r (reader) reader_down [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2023/06/01 09:39:15 150ACD8A r (reader) reader_down [internal] Reader sci internal, detected box type: generic
2023/06/01 09:39:15 7A54396E h (reader) emulator [emu] creating thread for device emulator
2023/06/01 09:39:15 1E456D47 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2023/06/01 09:39:15 150ACD8A r (reader) reader_down [internal] card detected
2023/06/01 09:39:15 1E456D47 r (reader) emulator [emu] card detected
2023/06/01 09:39:16 1E456D47 r (reader) emulator [emu] found card system emu
2023/06/01 09:39:16 1E456D47 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2023/06/01 09:39:16 1E456D47 r (emu) Key file not found in: /var/etc/oscam
2023/06/01 09:39:16 1E456D47 r (emu) Key file not found in: /var/keys
2023/06/01 09:39:16 1E456D47 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 S:0 F:0 P:0 D:0 T:0 A:0
2023/06/01 09:39:17 150ACD8A r (reader) reader_down [internal] ATR: 3B 20 00
2023/06/01 09:39:18 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:18 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [internal] Bulcrypt card detected, checking card version.
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [internal] Bulcrypt v2 card detected. *UNSUPPORTED CARD VERSION*
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [internal] CAID: 0x4AEE|0x5581, CardType: 0x4c, Serial: #############, HexSerial: ###########
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [internal] Ready for requests.
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [internal] found card system bulcrypt
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Reading subscription info.
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Subscription data last update : 2023-05-31 04:04:01 GMT
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Subscription should be active to : 2023-07-01 04:04:01 GMT
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Subscription data 1 (0x0086): +----++-
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Subscription data 2 (0x0086): +----++-
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Package 02 is active:
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Package 04 is active:
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] Package 80 is active:
2023/06/01 09:39:19 150ACD8A r (reader) reader_down [bulcrypt] End subscription info.
2023/06/01 09:39:23 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:23 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:28 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:28 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:33 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:33 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:34 4DCF2D3F c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2023/06/01 09:39:38 4DCF2D3F c (-) -- Skipped 1 duplicated log lines --
2023/06/01 09:39:38 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:38 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:43 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:43 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:48 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:48 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:53 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:53 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:54 4DCF2D3F c (dvbapi) ERROR: Could not start demux filter (api: 2 errno=0 Success)
2023/06/01 09:39:58 4DCF2D3F c (-) -- Skipped 1 duplicated log lines --
2023/06/01 09:39:58 4DCF2D3F c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2023/06/01 09:39:58 4DCF2D3F c (dvbapi) Demuxer 1 no enabled matching ecmpids -> decoding is waiting for matching readers!

Подобни теми
Тема	Започнал темата	Форум	Отговори	Последно мнение
Oscam и Bulcrypt	илко80	Кошче	5	27-09-2012 15:42
oscam.services, oscam.srvid и oscam.provid	Пакостник	MPCS/OScam	1	10-04-2011 20:51
Bulcrypt and Oscam	lio	Кошче	3	05-04-2011 10:28
Bulcrypt	bu12tras	Кошче	0	11-03-2011 16:09

Следните потребители БЛАГОДАРЯТ на dzumba за този полезен пост :
AstraK (17-05-2023)

Следните потребители БЛАГОДАРЯТ на dzumba за този полезен пост :
BULLET (17-05-2023)

Следните потребители БЛАГОДАРЯТ на bate_dino за този полезен пост :
BULLET (17-05-2023)

Следните потребители БЛАГОДАРЯТ на woooow за този полезен пост :
BULLET (17-05-2023)

Следните потребители (4) благодарят на BULLET за този полезен пост
AstraK (18-05-2023), demmlik (18-05-2023), naumovi (18-05-2023), ДимитърЦЦ (18-05-2023)

Активни потребители разглеждащи тази тема в момента: 6 (1 членове и 5 гости)
Астон